Walter Turn Toolholder Precisely Targets Coolant Where It's Needed

The Walter Turn toolholder with cooling and screw clamping (S…-P) targets coolant on the rake face and flank face to maximize the cooling effect. Rake face cooling helps break and control chips, and double flank face cooling directly at the cutting edge extends tool life.

Users can apply a coolant pressure from 145 to 2,175 psi (10 to 150 bar). Improved chip breaking occurs when the coolant pressure is greater than 580 psi (40 bar). Optimum coolant application increases tool life by 30 to 150%.

The toolholder features a flexible coolant connection with direct coolant transfer to a VDI tool adaptor (A21XX-P) or via a coolant hose set with G1/8 in. thread (K601). The turning toolholder provides a universal adjustment range.

The toolholder accepts CCMT3, DCMT3, and VBMT3 (CCMT09, DCMT11, and VBMT16) indexable inserts. The shank dimensions are 0.75 x 0.75 in. (20 x 20 mm) and 1 x 1 in. (25 x 25 mm).

Features:

• Cut at higher speeds and
• Longer tool life with flank face cooling
• Produce short, manageable chips with rake-face cooling 
• No manual adjustment of coolant nozzles
• Improved machine availability and ease of operation

Applications:

• Longitudinal turning
• Facing and profile turning of components with a small diameter
• Machining stainless steel, high-temperature alloys, and steel (ISO M, S, and P workpiece groups)

Walter USA, LLC
Greer, SC
(800) 945-5554
www.walter-tools.com