A new version of the 800 series, known as the 800 Series Hybrid, seeks to overcome the challenges associated with standard extrusion applications such as difficult-to-process materials and demanding applications where there is zero fault tolerance. The challenge was to create a hybrid design that incorporates the benefits of layer overlapping while reducing unnecessary complexity and making the technology more cost-affordable. This was achieved by overlapping layers in each semi-deflector, using a single cone.
Features include eliminating weld lines in materials, reduced sensitivity to changes in viscosity, reduced sensitivity to changes in line speed, myriad material and multilayer application possibilities, works in all tubing and jacketing applications with a wide range of materials, and more.
The tool reduces stagnation since overlapping layers are more inherently balanced than single layers and also because each semi-deflector is “tuned to flush.” Conventional deflectors must simultaneously achieve a balance between flushing, balancing, and eliminating the weld line. There is less difference between the slowest moving material and the fastest moving material in the deflector channels, thus making the viscosity more consistent in the deflector.
Features:
- Fixed center or Adjustable
- One piece body and flow diverter
- Built-in cartridge heaters
- Adjustable gum space
- Low volume
- Expandable to multi-layer
- Adapts to your existing tooling (in some cases)
- Quick change tooling
- Dual head
- Rotating tool
- Split feed balanced flow
Applications/Industries:
- Custom Design
- Solid Core
- Stripes
- Multilayer
- Dual Output
- Multi-lumen
- Hollow Core
- Single Extrusion
- Automotive & Transportation
- Chemical Hose & Tube
- Consumer Products
- Cosmetics
- Energy
- Fiber Optic
- Industrial Hose & Tube
- Industrial Pipe
- Irrigation
- Medical
- Pharmaceuticals
- Under Sea Cable
- and more...
| Model | Core Diameter | Max Die | ||
|---|---|---|---|---|
| 819 | 0.437 in. (11 mm) | 0.5 in. (12.7 mm) | ||
| 820 | 0.718 in. (18.2 mm) | 1 in. (25.4 mm) | ||
| 823 | 1.125 in. (28.5 mm) | 1.5 in. (38.1 mm) | ||
| 824 | 1.625 in. (41.3 mm) | 2.25 in. (57.15 mm) | ||
| 825 | 2.375 in. (60.3 mm) | 3 in. (76.2 mm) | ||
| 827 | 3.25 in. (82.5 mm) | 4 in. (101.6 mm) | ||
| 830 | 4.5 in. (118.3 mm) | 5 in. (127 mm) | ||
| 832 | 5.5 in. (139.7 mm) | 6 in. (152.4 mm) | ||
Guill Tool & Engineering
West Warwick, RI
(401) 828-7600
[email protected]
guill.com
