VITA 57.4 Connectors Provide Reliable Performance

Nov. 27, 2018
Samtec's connectors are capable of speeds up to 28 Gbps.

ANSI/VITA 57.4-2018 FPGA Mezzanine Card Plus Standard, also referred to as FMC+, expands upon the I/O capabilities defined in ANSI/VITA 57.1 FMC by adding two new connectors that enable higher data rates.

 

FMC+ modules provide a standardized mezzanine card often employed in FPGA development solutions and by COTS manufacturers. Due to features such as their small form factor and user-defined pins, FMC+ provides attractive features to the end user while maintaining modularity. In addition to providing backward compatibility with FMC mezzanine cards, FMC+ also extends computing performance and bandwidth, all fitting within the same form factor as FMC.

 

Samtec’s SEARAY vertical connectors are featured in the VITA 57.4 standard, which specifies 8.5 mm and 10 mm stack heights. SEARAY is capable of speeds up to 28 Gbps, provides low insertion/extraction forces, and features solder charge terminations. In addition, the FMC+ standard also specifies the use of an optional extension connector (the High Serial Pin Connector extension, or HSPCe). Employing this extension connector increases the total pin count by 80 positions, arranged in a 4 x 20 array. This brings data rates from 28 to 32 Gbps over full duplex channels. The expanded SEARAY connector was chosen based on its successful performance in the VITA 57.1 FMC Standard, as well as its high-speed capabilities and rugged design.

  • FMC/FMC+ daughter cards/modules
  • FPGA-based development boards with provisions for FMC/FMC+ expansion
  • FPGA-based networking cards with provisions for FMC/FMC+ and optical interfaces
  • FPGA-based characterization platforms with provisions for FMC/FMC+ expansion
  • Embedded systems such as networking development bridge cards