CGW-Camel Grinding Wheels has expanded its’ U.S.-manufactured Z3 flap disc line with the introduction of XXL and compact flap discs. Z3 flap discs are manufactured from premium zirconia alumina grain and have a strong polyester/cotton backing material. The XXL Z3 flap discs have wider flaps that provide more material for easier use on angled work surfaces and longer life. The new flap disc line consists of 12 discs available in 4-1/2-inch diameter and 40, 60 and 80 grit sizes. XXL discs are available in type 27 or type 29 shapes, with either 7/8-inch or 5/8-11-inch arbor holes. Compact Z3 flap discs are engineered with 20 percent more material than regular Z3 discs and have flaps compressed at a four degree angle for added strength during rough grinding and edge work. Compact flap discs are available in 4-1/2-inch diameter, 40 – 80 grit sizes and 7/8-inch or 5/8-11-inch arbor holes. The compact flap disc line consists of six discs. “Adding the XXL and compact Z3 flap discs allows CGW to offer the end user effective edge and angled work surface solutions,” said Joe O’Mera, president, CGW-Camel Grinding Wheels.
