AKMH Stainless Steel Servomotors

Aug. 25, 2013
Kollmorgen's FDA-approved washdown servo motors are designed for food contact and splash zones.

Stainless steel AKMH Motors are designed to address the Food Safety Modernization Act (FSMA). These IP69K-rated synchronous servomotors feature a hygienic housing design that meets EHEDG, NSF, BISSC, and 3A guidelines.

 

The series is constructed with materials to provide long-life and trouble-free operation, even with daily exposure to chemicals and high-pressure washdowns. Its single-cable solution reduces the number of potential failure modes and minimizes installation time.

 

The smooth surface design and use of highly corrosion-resistant 316L stainless steel decrease the risk of product recalls by reducing the possibility of bacteria growth. The AKMH requires no additional protection and can be sanitized without covering it or removing it from the machine.

  • IP69K certification for motor and cable
  • Unique design technique to eliminate condensation
  • FDA Approved, food-grade O-ring seals
  • All exposed surfaces are 316L Stainless Steel, superior to 303/304 for hygiene & corrosion resistance
  • Round design with no nooks or crannies
  • Sloped rear cover to eliminate puddling, even in vertical mounting
  • No external hardware (no bolts, washers or screws) to trap soil or pathogens or fall into food
  • Smooth surface meeting EHEDG & 3A criteria, promotes rapid cleaning and no harboring of pathogens
  • FDA Approved, food-grade bearing lube
  • FDA Approved, food-grade shaft seal
  • Cable designed to eliminate the need for conduit
  • No protective covers needed for washdown
  • FDA-approved, food-grade tubing option for applications where the cable is in the food zone
  • Single cable for increased reliability, faster cleaning, and fewer places to harbor pathogens
 Power Torque Range  Peak Torque Range  Max. Speed Motor Dia. AKMH2  0.2 to 0.5 kW 0.4 to 1 Nm2 to 5.58,0003 in. (73 mm) AKMH3 0.4 to 0.7 kW1 to 2.5 Nm4 to 10.53 in. (85 mm) AKMH4 0.6 to 1 kW2 to 5 Nm6 to 206,0004 in. (114 mm) AKMH5 0.8 to 2 kW4 to 12 Nm13 to 45 5 in. (132 mm)  AKMH6 2 to 5.5 kW10 to 21 Nm35 to 797 in. (186 mm)