Paradur Ti Plus, Paradur Ni 10, and Prototex TiNi Plus Tap Lines for Threading Get New J Profiles

Walter has expanded the range of its Paradur Ti Plus, Paradur Ni 10, and Prototex TiNi Plus tap lines by increasing its existing portfolio for J profiles with new dimensions.

Screw threads with J profiles feature a root radius, which improves the tensile stress area of the fastener and helps reduce the stress concentration factor in the thread to make the thread stronger. The minor diameter of J-profile threads is curved to minimize stress points created by sharp edges or corners, which can break due to vibration. Threads with the J profile are particularly preferred in the aerospace industry for difficult-to-machine materials.

Paradur Ti Plus and Prototex TiNi Plus taps are now available to produce thread sizes:

• UNJC4 to UNJC3/8
• UNJF6 to UNJF5/8
• MJ3 to MJ10

Paradur Ni 10 taps are available to produce thread sizes:

• UNJC4 to UNJC3/8
• UNJF6 to UNJF7/8
• MJ3 to MJ6

The Paradur Ti Plus taps are for threading blind holes with a geometry specially developed for machining titanium alloys with a tensile strength of at least 700 N/mm² using emulsion instead of oil. The tool has a wear-resistant, titanium-free ACN coating to prevent built-up edge, a 15-degree helix angle with chamfer form C, and an enlarged core diameter for a high level of stability and process reliability. They perform up to 2xDN in the standard range.

The Paradur Ni 10 taps are also for threading blind holes. Walter specially developed the geometry for tapping nickel-based superalloys, such as Inconel 718, with a tensile strength up to 1,450 N/mm². The uncoated tool is also cost-effective when tapping stainless steel with difficult cutting properties and steel with a tensile strength from 1,200 to 1,600 N/mm². The cutting edges are stable due to the reduced 10-degree helix angle in the chamfer section. The usable length is up to 1.5xDN in the standard range.

The Prototex TiNi Plus tap is effective for through-hole threading. Walter specially developed the geometry to thread titanium and nickel-based superalloys (ISO S material group) with a tensile strength of 700 N/mm² or higher using emulsion. It provides effective depths to 2xDN in the standard range. In addition to aerospace components, the Prototex TiNi Plus tap excels in threading components for the medical device industry.

Walter USA, LLC
Greer, SC
(800) 945-5554
www.walter-tools.com