Snap-on Industrial’s line of Plasma Cutters can cut up to 3/4-in. thickness on a variety of ferrous, non-ferrous, and high-strength materials.

 

Plasma Cutters feature depth-of-cut adjustability, which allows the top layer of material to be cut without disturbing the base layer. Making these cuts possible is inverter technology that drives a small yet powerful package size allowing for portability out in the shop or on the job site.

 PLASMA20iPLASMA30iPLASMA60i
Max. Output AmpsAdjustable 5-20Adjustable 5-25Adjustable 20-55
Cut Thickness1/4 in.3/8 in.3/4 in.
Sever Thickness 3/8 in.1/2 in.
Primary Input (Volt AC)115115 or 230208/230
Primary Input20 A30 A 115V or 20 A 230V40 A
Duty Cycle Rating100% at 15 A60% at 22 A60% at 40 A
Min. Compressed
Air Requirements
50 PSI at 5 CFM50 PSI at 7 CFM68 PSI at 7 CFM
Torch and Ground Cable Lengths12 ft18 ft

*Consumable kits are available for all three plasma cutters that include nozzle holders, nozzles, swirl rings, and electrodes.