OPTISONIC 6300 V2 is an ultrasonic flowmeter with a stationary, clamp-on design that is ideal for a wide range of systems. The OPTISONIC 6300 V2 allows users to measure flow anywhere necessary, all while processes continue.
New to the OPTISONIC 6300 V2 is a viscosity range of up to 200 cSt, no need for re-greasing due to solid coupling material, a next-generation signal converter for enhanced application range, Namur NE107 diagnostics, and integrated thermal energy calculation.
It's suitable for diameters ranging from 0.5 to 160 in. It has a process temperature range of -40 to 392°F (-40 to 200°C). This flowmeter delivers accurate sensor alignment using rail-mounted transducers and minimized uncertainty through the installation wizard and optimization routine.
This flowmeter is constructed as a submersible stainless steel sensor rail (IP 68/NEMA 6P). For the complete diameter range, the OPTISONIC 6300 V2 offers flexible configurations: single and dual ultrasonic sensors; wall and field signal converter housing; and V, W, Z, and X-mode measurement modes.
- Stationary device, for installation at any location without process interruption or need to cut pipes
- Up to 392°F (200°C)
- Robust stainless steel sensor rail for pipes DN15 to 4000 / 0.5 to 160 in.
- 4 to 20 mA, HART 7, Modbus, FF, Profibus-PA/DP
General Information | |
Product Type | Flowmeter |
Product Family Name | OPTISONIC |
Product Positioning | For permanent flow measurement of liquids |
Measurement Principle | Ultrasonic |
Measured Media | Liquids |
Operating Conditions | |
Process Pressure | No limitation |
Process Temp. | -40 to 392°F (-40 to 200°C) |
Process Connections | |
Other Connections | Stainless steel mounting straps for pipes DN15 to 1500 / 0.5 to 60 in. |
Approvals/Standards | |
NAMUR Compliance | NE 107 |
Certificates/Approvals Ex | ATEX, cQPSus, IECEx |
Communication | |
Analog Outputs | 4 to 20 mA |
Discrete Outputs | Pulse, Status |
Digital Outputs | FOUNDATION Fieldbus, HART, Modbus RTU, Profibus-DP, Profibus-PA |