Electro Standards Laboratories has just developed the new Model 9062 RJ45 Switch. This sleek all-aluminum rackmount switch allows you to switch 4 T1 lines to 2 routers. The 19” rackmount enclosure, 1U height, fits in any standard 19” equipment rack. This switch is very simply operated with a front-panel rotary knob. Simply turn to All Router 1, Normal, or All Router 2. In the A position, T-1 lines 1, 2, 3, and 4 are connected to ROUTER A corresponding connectors A1, A2, A3, and A4. In the B position, T-1 lines 1, 2, 3, and 4 are connected to ROUTER B corresponding connectors B1, B2, B3, and B4. In the NORMAL position, T-1 lines 1 and 3 are connected to ROUTER A connectors A1 and A3; and T-1 lines 2 and 4 are connected to ROUTER B connectors B2 and B4. All eight pins of all connectors are supported. This easy to use switch replaces the need to manually patch T-1 circuits at the DSX-1 patch panels. • Channels - 4 • Configuration - Rackmount • Connectors - RJ45 • Interface - Allocates 4 T1 Lines to 2 Routers • Local Control - Rotary Knob • Pins Switched - 8
