Designed as slim as possible, the KIWA KH-4100kai is a high-performance horizontal machining center with full rotary B-axis and can be installed in a space for a vertical machining center.

 

Benefits include simultaneous four-axis machining, a wide center trough in the machining area, and a unique coolant chip flow system. The BIG-PLUS 40-taper spindle, backed by 20 hp and capable of running at 15,000 rpm, guarantees rigidity and uniform cuts. A 60-tool automatic tool changer comes standard, giving operators versatile tooling options. Chips will go directly down the center trough for disposal at the rear of the machine. Sheet metal covers on both sides are steeply slanted to guide chips to the trough. Travel is 20.1 in./ 510 mm on the X, Y, and Z axes.

  • (4) Simultaneously Controlled Axes
  • Provision for Coolant Through Spindle
  • Coolant Chip flow System
  • Spindle Oil Cooler
  • Pallet and Chip Wash
  • Chip Conveyor – LNS-Turbo MH500
  • Tool Life Management
  • AICC2 400 block look ahead
  • 1280 Meter / 512 kB Memory
  • Helical Interpolation
  • 200 Tool Off Sets
  • Macro Programming

TRAVEL

X-Axis Travel20.1 in.Y-Axis Travel20.1 in.Z-Axis Travel20.1 in.4th-Axis Travel
(Rotary Table)0 to 360-deg.

PALLET

Pallet Surface to Spindle Center

2APC: 2.0 to 22.0 in.

Pallet Center to Spindle Nose3.9 to 24 in.Pallet Size15.7 x 15.7 in.Pallet Load Capacity1,100 lb.Max. Workpiece Size21.7 x 33.5 in.Pallet change Time12.5 sec

FEED RATE

X-Axis Rapid Traverse3,149 in/minY-Axis Rapid TraverseZ-Axis Rapid Traverse4Th Axis37 rpmCutting Feed (X/Y/Z)1,181 in/min

SPINDLE

Spindle Power20 HPSpindle Speed15,000Spindle TaperCat 40

TOOLS

Standard Number of Tools60Maximum Tool Weight17.6 lb.Maximum Tool Length15.7 in.Maximum Tool Diameter3.3/5.5 in.Tool Changing Time- Tool to Tool0.9 sec

GENERAL

Coolant Tank Capacity79.3 galMachine Weight2APC+60ATC: 16,940 lb.Machine ControlFANUC 0i-MF