• Subscribe
  • Magazine
  • Advertise
    • 66673f9074c1d40008e3e628 830 350
    830 350

    The DHF 8000ST, a single table version of the DHF 8000 five-axis horizontal machining center, incorporates a turning function and was designed without a pallet changer to offer a smaller footprint.

     

    The nodding head spindle and direct-drive B-axis rotary table allow the 8000ST to handle a complete range of machining and turning processes from roughing to finishing in a single setup. This ability to attack parts from all sides provides increased parts accuracy. In addition, the configuration makes quick work of multi-face workpieces and the 5-axis simultaneous machining of complex shapes.

     

    Like the DHF 8000, the nodding head spindle has a stroke of +60 to -100-deg. (up/down) with clamping torque of over 3,600 ft-lb. The DHF 8000ST comes with a 47 hp HSK100-T spindle taper with a 6,000 r/min gear head spindle, and optional 15,000 r/min high-speed spindles are also available.

     

    This scaled-up HMC can easily support workpieces weighing up to two tons, allowing them to be machined with the same precision as their much smaller counterparts. A 1,000 mm (39.4 in.) diameter pallet offers a bigger work envelope than the previous model, and its large working area can readily hold parts up to 1,600 mm (62.9 in.) diameter x 1,400 mm (55.1 in.) in height.

     

    It's constructed with cross roller linear guideways for extra rigidity. The Y and Z axis are fitted with dual ball screws to ensure greater structural stability and accuracy, while the column is designed with high static and dynamic rigidity to provide optimum machining performance. Linear scales on each axis maintain superior positioning accuracy.

     

    A thermal compensation system, consisting of sensors strategically placed within critical areas of the machine, is monitored and compensates if thermal growth is detected. Cooling systems for the spindle and ball screws also assist with thermal stability. A 120-tool magazine comes standard, which is expandable to 376 tools. The DHF 8000ST comes equipped with a Siemens 840D control.

    • Rotary Table Diameter: 800 mm
    • Spindle Taper: CAT50
    • Spindle rpm: 6,000 rpm
    TRAVELSX-Axis Travel57.1 in.Y-Axis Travel47.2 in.Z-Axis Travel59.1 in.FEEDRATESX-Axis Rapid Traverse1,575 ipmY-Axis Rapid Traverse1,575 ipmZ-Axis Rapid Traverse1,968 ipmCutting Feedrate.04 to 787 ipmTABLERotary Table Diameter31.5 in.Maximum Table Capacity4,409 lb.Maximum Workpiece Size55.1 x 55.1 in.TOOL CAPACITYNumber of Tools STD120Number of Tools OPT 1150Number of Tools OPT (Matrix)196 to 376SPINDLESpindle TaperCAT50Spindle Power29.5 / 46.9 hpSpindle rpm6,000 rpmSpindle Torque708 ft-lbNodding A Axis+60 deg to -100 degPower Transmission TypeGear DrivenOPTIONAL HIGH RPM SPINDLETool ShankHSK A100Spindle Power68 hpSpindle rpm15,000 rpmSpindle Torque108 ft-lbNodding A Axis+60 deg to -100 degPower Transmission TypeBuilt-InDIMENSIONSHeight160 in.Length466 in.Width229.5 in.Weight68,343 lb.