The PCM-CAN-2-ISO, a PC/104-compliant, dual-channel, isolated Controller Area Network (CAN) module with Windows and Linux drivers employs high-speed isolated data couplers and power supplies to provide 1,000V protection between the 2 NXP SJA1000 CAN controllers and the network interface. This makes the module ideal for operation in high-voltage renewable energy, high-speed industrial control, or unpredictable automotive applications, while it maintains low EMI and low-latency operation.
Each CAN channel can provide isolated +5V DC power or receive isolated +5 to +12V DC power from the interface for additional flexibility. The +5V DC power supply includes overvoltage, overcurrent, and short-circuit protection.
The PCM-CAN-2-ISO is compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID). CAN is an industry-standard, serial, asynchronous, multi-master communication protocol for connecting electronic control modules, sensors, and actuators in automotive and industrial applications. The PCM-CAN-2-ISO supports transfer rates to 1 Mb/sec and has jumper selectable termination resistors so it can be used in various topology systems.
- Two NXP SJA-1000 CAN Bus controllers
- Compliant with CAN Bus specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- Transfer rates up to 1 Mbps
- Channel-to-channel and channel-to-system isolation
- Isolation on the CAN Bus data connection up to 1,000V
- On-board isolated 1W power supply for interface
- Jumper selectable termination resistors
- Jumper selectable IRQ and I/O base address
- Software drivers available for Linux and Windows
- Industrial -40 to 185°F (-40 to +85°C) operational temperature
