SDI Select 60 Dry Ice Cleaning System

Feb. 9, 2013
Cold Jet's dry ice cleaning system accommodates dry ice of any form including pellets, nuggets, blocks, and leftover scrap.

The SDI Select 60 dry ice cleaning system accommodates dry ice of any form (pellets, nuggets, block, and leftover scrap), offers the ability to shave ice or direct feed pellets for unlimited control, accommodates all Cold Jet standard Aero accessories, and delivers cleaning effectiveness. 

 

The Select 60 offers the value of delicate cleaning and high-level aggression all in one frame. With the ability to shave with any dry ice media or direct feed standard pellets, it offers unrivaled cleaning performance and eliminates worries about dry ice availability.

 

It can clean large surfaces of thin, hard contaminants without damaging the substrate and when faced with heavier contaminants, the operator can bypass the shaving media, turn up the aggression, and clean using full 3 mm (0.1 in.) pellets.

  • Shave with any dry ice media (even scrap ice)
  • Bypass for full 3 mm (0.1 in.) pellet performance
  • Clean from as low as 50 cfm to save on compressed air and reduce noise levels
  • Increase pressure up to 250 psi to clean the most stubborn contaminants
  • Choose from any Aero nozzle or accessory to maximize flexibility
 Dimensions (L x W x H) 24 x 28 x 43 in. (610 x 711 x 1,092 mm) Weight 343 lb. (156 kg) Hopper Size 60 lb. (27 kg) Feed Rate 0 to 6 lb./min (0 to 3 kg/min) Air Consumption 50 to 215 cfm @ 80 psi (1.4 to 6 m3/min @ 5.5 bar) Blast Pressure 65 to 250 psi (4.5 to 17 bar) Power Electric