Operators and technicians can increase productivity, convenience, and safety when tightening or loosening high-torque bolts with the 1-in. Cordless Impactool Impact Wrench. With 3,000 foot-pounds of nut-busting torque, the 1-in. tool provides the power technicians need to handle bolts that are hard to break, rusted or tough to loosen, all in one cordless design. The wrench is the first cordless tool on the market to reach this level of torque.
The tool comes with two anvil options: an extended, 6-in. anvil and a short, standard anvil for optimal versatility. The 6-in. anvil is ideal for vehicle repair applications as it helps operators access hard-to-reach places. The standard anvil offers the convenience of a cordless design without sacrificing power for operators working in extreme environments such as oil and gas refineries, foundries, and other industrial sectors.
With no hoses and no need for an air compressor, operators can complete tasks quickly and efficiently and contribute to cost savings due to minimal maintenance. The absence of hoses also removes tripping hazards, so operators can avoid the possibility of injuries. A power control shut-off system automatically shuts off the tool when it has reached the set torque amount, which prevents over-tightening and stripping of the bolt. The tool has four different power modes: full reverse, max tighten, and two modes in-between to prevent over-tightening and stripping.
The tool includes two 5.0 Amp Hours batteries to last a full workday and can perform up to 250 bolt removals and installations on a single battery charge. There are various kit options available, including the W9691-KE4 with a dual bay charger and four batteries.
| Model | W9691 | W9691-K4E | W9491 | W9491-K4E |
| Item | Bare Tool | Tool, 4 Batteries, & Dual Bay Charger | Bare Tool | Tool, 4 Batteries, & Dual Bay Charger |
| Drive Size | 1 in. (2.5 cm) | |||
| Voltage | 2 x 20V | |||
| Fasteners per charge | 250 | |||
| Nut Busting Torque | 3,000 Ft.-lb. (4,067 Nm) | 2,600 Ft.-lb. (3,525 cm) | ||
| Full Forward Torque | 2,200 Ft.-lb. (2,982 Nm) | |||
| RPM | 890 | |||
| Weight | 29.1 lb. (13 kg) | 25.9 lb. (11.7 kg) | 24.3 lb. (11 kg) | 27.5 lb. (12.5 kg) |
| Length | 26.1 in. (66 cm) | 20.1 in. (51 cm) | ||
| Width | 6.9 in. (17.5 cm) | |||
- Up to 3,000 ft-lb. of Nut Busting Torque and 2,200 ft-lb. of tightening torque
- Four power control modes with two featuring automatic shut-off (at 180 & 400 ft-lb. of fastening torque)
- Integrated Power Control System includes two modes which will stop the tool in SNUG or MID-POWER close the set values listed above
- High torque impact wrench battery leverages existing IQV20 battery platform with enough power for a full day of work
- Provides superior ergonomics - Both batteries are nestled into the frame of the tool making it less cumbersome to handle
- IP56-rated for use in tough environmental conditions such as fleet truck maintenance, oil & gas, power generation, and rail industries.
- Impact and chemical-resistant composite housing stands up to almost all fluids found in maintenance shops or on job sites
- Up to 250 bolts per charge
- Lowers overall cost of ownership by leveraging your existing battery stock - The W9491 & W9691 uses the same 20V lithium-ion battery used across Ingersoll Rand’s entire line of IQV20 cordless tools
- Version with 6-in. extended provides better access in recessed areas and hard to reach applications
- Backed by a 3-year limited warranty on tools and chargers.
