The CBF200 Circuit Breaker Finder is a useful, one-person operation tool for residential and commercial electricians, home inspectors, kitchen and bath installers, apartment/condo property managers, DIY'ers, and handymen.
The tool features a comparison mode that identifies the correct breaker, even when signal strengths are very close. The receiver also functions as a Non-Contact Voltage Detector and the transmitter enables users to detect faulty wiring in 3-wire receptacles and tests GFCI for proper operation.
The tool's bright LEDs indicate 6 wiring faults, including Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse, and Hot on Neutral with Hot Open. The CBF200 enables the safe identification of breaker locations within any electrical panel without removing power.
The CBF200 Circuit Breaker Finder weighs only 9.8 oz, is cETLus listed, and comes with a transmitter, receiver, and 9V battery.
| Receiver | ||
| Power | 9V Battery | |
| Auto Power Off | After 10 minutes | |
| NCV Detector Range | 24 to 600VAC | |
| Safety Category | CAT III-300V | |
| Transmitter | ||
| Voltage | 120VAC | |
| Frequency | 47 to 63Hz | |
| GFCI Leakage Current | 7mA @ 120VAC | |
| Safety Category | Transmitter: CAT II-300V; NCV: CAT III-300V | |
| Dimensions | Transmitter | 4.7 x 2.5 x 1.3 in. |
| Receiver | 5.1 x 2.4 x 1.5 in. | |
| Weight | 9.8 oz (260 g) | |
- Detect faulty wiring in 3-wire receptacles
- Lights display 6 wiring faults:
Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse, Hot on Neutral with Hot Open - Test GFCI for proper operation
- Built-in Non-Contact Voltage Detector
(80-300V, CAT III-300V) - Includes Transmitter, Receiver and 9V Battery
