The 4-Way Fork Box Pallet Dispenser offers a small footprint with a modular pallet dispenser or stacker that requires less supply air in a form that can be modified to meet nearly any demand.
Standard dispensers rely on heavy-duty pneumatic cylinders to lift stacks of pallets. This demands a great deal of air supply and limits the flexibility of the dispenser because lifting positions are fixed with air cylinders. The standard Fork Box Pallet Dispenser (FBDA) uses pneumatically actuated forks to hold the pallet or stack while a hydraulic scissor lift does the heavy lifting. This not only lowers air supply demands when compared to typical pallet dispenser models, but the scissor lift also allows virtually unlimited positioning for any size pallet. No air supply? No problem. The fork actuation and scissor lift can be made to use electric, hydraulic, or pneumatic actuation depending on the needs or limitations of the site.
The FBDA is also space-saving and offers a standard 15 pallet capacity magazine, but an extension is available to increase capacity to 20 pallets. By storing pallets in the dispenser, you recover an average of 13.33 ft2 of floor space per short stack that would otherwise be sitting on the plant floor.
The FBD4 also takes on a bit of a modular approach, allowing for the replacement of individual components if they should get damaged or fail over time, instead of replacing the entire unit. Solid steel sidewalls on the magazine prevent any broken or non-conforming pallets from causing snags or misalignment during operation. The integrated two-strand chain conveyor allows for simple maintenance and longevity, without having to design around the complex lifting mechanisms or unique shapes of dispensers without a conveyance system. Having this integrated conveyor, positioned at your desired height, allows you to drop it next to any standard palletizing conveyor.
Two standard options for controls are offered: a basic controls package that includes all necessary sensors for operation with no PLC or programming included, and a full controls package with PLC and programming to a standard operating procedure ready to be used immediately upon installation. Each FBD4 is fully configurable at the time of quote to include any customer purchased component specifications, paint colors, and conveyor heights.
- Designed for 40 W x 48 in. L 4-way pallets
- Straight, left or right pallet exit
- Standard magazine capacity of 15 pallets
- Pneumatic adjustable forks (60 PSI input)
- Integral hydraulic scissor lift
- Integral 2-strand direct drive chain conveyor
- 12-in. minimum top of chain height
- Minimal guarding required
- Photoeye sensors for product detection
- Ultrasonic sensor for lift positioning
- Basic or full controls packages are available
Options:
- Electrical, pneumatic or hydraulic actuated
- Fork configurations
- Integrated conveyors
- Product entry and exit
- Adjustable magazine
- Magazine extension
- Guarding or fencing
- Control packages
