NEW KEMÒ-FLASH 500 LOW HAPS PRIMER IS THE RIGHT FOUNDATION FOR A DURABLE FINISH

When it comes to providing corrosion protection, OEMs and job shops can count on KEM-FLASH 500 LOW HAPS PRIMER from Sherwin-Williams Chemical Coatings. The ultra-low, high-solids primer meets all federal standards for HAPS emissions and provides quick film build with fewer passes. KEM-FLASH 500 LOW HAPS PRIMER provides excellent performance and resistance to salt spray and humidity. It forms a strong bond when applied to properly prepared aluminum, steel, iron and galvanized surfaces and also provides excellent inter-coat adhesion. Designed to optimize the appearance of high-gloss acrylic and alkyd topcoats, KEM-FLASH 500 LOW HAPS PRIMER creates a dense, uniform base that promotes excellent topcoat holdout. Ideal for application on off-road vehicles, construction machinery and farm equipment, the primer is durable and keeps equipment looking good in the field. The primer is also easy to apply with conventional or airless spray without reduction or heat. Air assisted or HVLP spray methods can also be used with this primer. In addition, the fast-drying capability of KEM-FLASH 500 LOW HAPS PRIMER allows topcoats to be applied in as little as 30 minutes.• Gloss:Flat - 5-15 units • Volume Solids:54 ± 2% • may vary by color • Viscosity: 14-32 secs., #3 Zahn Cup; 40-70 secs., #4 Ford Cup • Recommended Film Thickness: • Mils Wet 2.8 - 3.5 • Mils Dry 1.5 - 1.8 • Package Life:24 months, unopened