Model RG Safety Gate

July 14, 2022
Conveyor Components' safety gate can be installed as a left or right opening gate.

Meeting the current requirements of OSHA 1910 Subpart D and ANSI-A1264.1-2017, the Model RG (Ready Gate) is an adjustable self-closing safety gate. The core is a stainless-steel spring that resists rust and ensures the gate closes fully and automatically. The standard construction is a mild steel/carbon steel frame with a UV-resistant polyester powder top coating and a zinc-rich primer underneath. A strike plate adds additional strength to the gate and a noise-dampening foam pad reduces loud noise when the gate closes.

 

It's available in red, safety yellow, and bright orange; it also comes in two sizes to protect 16 to 26 in. (40.6 to 66 cm) or 24 to 40 in. (61 to 101.6 cm) guardrail openings. The gate can be field mounted as a left opening or right opening and easily installs with only two wrenches. The included mounting brackets are adaptable to round or square guardrails between 1 to 2 in. (2.5 to 5.1 cm) in diameter.

  • The Ready Gate meets the current OSHA 1910 Subpart D & ANSI A1264.1-2017 standards
  • The Ready Gate easily installs with only 2 wrenches
  • The gate is manufactured from high quality carbon/mild steel with a zinc-rich primer and a polyester powder top coating
  • The gate can be mounted on guard railings from 1 to 2 in. (2.5 to 5.1 cm) in diameter
  • The gate width can be field adjusted in 2 in. (5.1 cm) increments
  • The gate is mounted with the two factory supplied mounting brackets (mounting hardware included)
  • The gate can be installed as left opening or right opening
  • The gate is available in high visibility red color or yellow color. Other colors upon request