The new Accu-Cut tm Model 5255-X Dicing Saw is a fully automatic, programmable machine nowoffered by Aremco Products, Inc. for precision dicing of ceramic, ferrite, quartz, and semiconductorsubstrates up to 6” x 6” x 1" thick.FEATURESAremco's Accu-Cut Model 5255-X is a fully programmable system for diamond dicing of ultra-hardmaterials such as ceramics, ferrites, quartz and semiconductor materials including silicon, galliumarsenide and bismuth telluride as large as 6" x 6" x 1" thick in production quantities.The Model 5255-X handles both metal- and resin-bonded diamond wheels up to 4.5" diameter, and isequipped with a variable speed spindle with 0 to 10,000 rpm control. Menu driven software isincluded to enable the operator to enter a cut profile for repetitive dicing over a 6" range. Indexing ishandled in steps of .0001" and the in-feed drive is controlled by an air/oil system for maintainingsmooth, precise stage control. An optic system including camera, monitor and electronic cross-hairgenerator is also offered to assist in part alignment.APPLICATIONSThe Accu-Cut tm Model 5255-X is used to dice a wide variety of components throughout theelectronics, ceramics and optics industries.• Microprocessor-Based • Menu Driven Cut Profiles, Metric or English • Stepper Motor Drive • Travel, 6" • Resolution, 0.0001" • Accuracy, +/- 0.00001" • Leadscrew, 40 Tpi • Rails, Fully-Supported, Pre-Loaded • Water Resistant • Drive, Air/Oil, In-Out Feed • Adjustable Speed, 0-3 Ips • Bearings, Split Type • Pre-Loaded, Corrosion Resistant • Adjustable Limit Switches • Manual Drive • Range, 0-360° • Drive, Pneumatic Cylinder • Manual Control, 20 Tpi Leadscrew • Depth of Cut, Dial Indicator Readout, 0.001" • Maximum Part Size, 1" x 6" x 6" • Mounting Blocks Ceramic or Glass • Quick Acting Air Vise (Standard) • Vacuum Manifold (Optional) • Spindle Diameter, 5/8" • Cartridge, Tri-Bearing Support • Blade Range, 2" - 4" OD • Variable Speed, 3/4 Hp, 3 Phase, 0 - 10000 Rpm • Coolant, Water Soluble Biodegradable, • Corrosion Resistant, Non-Misting Lubricant • Reservoir, 30 Gallon Recirculating • Sediment Tank • Pump Flow Rate, 40 Gph • Pressure, 50 Psi. • Monocular Microscope with 10x Eyepiece • with Cross Hairs and Quartz High • Intensity Lamp • Black & White 9” Video Monitor, Electronic • Cross Hairs, 100x Magnification, CCD • Camera (Optional) • Electrical, 220/240 Volts, 1 Phase, 50/60 Hz • Pressure, 80-90 Psi • Footprint, 3'D x 4'w x 4' H • Approximate Weight, 900 Lbs
