HS-100 and HS-300 Series Benchtop Dispersers

Jan. 27, 2022
A mechanical hand knob or AC variable speed drive allows varying of shaft speed in INDCO's HS-100 and HS-300 Series Benchtop Dispersers.

Ideal for a range of high-shear applications within labs, pilot plants, and small-scale product environments, the HS-100 and HS-300 Series Benchtop Dispersers can mix up to 5 gal (18.9 L) of materials at a time.

 

Each unit comes with a 1.5 to 3 hp motor (TEFC or EP), a 1 x 19 in. (25 x 483 mm) stainless steel shaft, and either a 4 or 5-in. (102 or 127 mm) stainless steel disperser blade. A mechanical hand knob or AC variable speed drive allows varied shaft speed from 1,000 to 4,100 rpm to achieve the desired shear within the mixing chamber.

 

Long service life is ensured by the pre-lubricated heavy-duty ball bearings. An airlift with an easy-to-use toggle valve raises and lowers the pneumatic cylinder 15 in. (380 mm) to allow placement of a holder with a capacity of 5 gal pail; airlift requires approximately 5 cfm at 40 to 50 psi.

 

The benchtop mixers are ideal for a variety of applications within food & beverage, chemical, paint & coatings, ink & pigments, plastics & rubber, and other industries. All wetted parts are constructed from 300 series stainless steel.

  • Can mix up to 5 gal (18.9 L) of materials at a time
  • A 1.5  to 3 hp motor (TEFC or EP)
  • A 1 x 19 in. (25 x 483 mm) stainless steel shaft
  • Either a 4 in. (102 mm) or 5 in. (127 mm) stainless steel disperser blade
  • A mechanical hand knob or AC variable speed drive allows varying of shaft speed from 1,000 to 4,100 rpm
  • Pre-lubricated heavy-duty ball bearings
  • An airlift with an easy-to-use toggle valve raises and lowers the pneumatic cylinder 15 in. (381 mm)
  • All wetted parts are constructed from 300-series stainless steel